Making

From Things and Stuff Wiki
Revision as of 18:58, 29 March 2016 by Milk (talk | contribs) (→‎General)
Jump to navigation Jump to search


General







Sewing

See also Fabric etc

Fixing

Crafting

DIY


Materials

  • https://en.wikipedia.org/wiki/Refractory - materials are used in linings for furnaces, kilns, incinerators and reactors. They are also used to make crucibles and moulds for casting glass and metals and for surfacing flame deflector systems for rocket launch structures
  • https://en.wikipedia.org/wiki/Crucible - a container that can withstand very high temperatures and is used for metal, glass, and pigment production as well as a number of modern laboratory processes. While crucibles historically were usually made from clay,[1] they can be made from any material that withstands temperatures high enough to melt or otherwise alter its contents.


Paper

Woodwork

Tools



  • https://en.wikipedia.org/wiki/Rip_saw - any saw blade for cutting wood perpendicular (against) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.

The cutting edge of each tooth is angled in an alternating pattern. This design allows each tooth to act like a knife edge and slice through the wood in contrast to a rip saw, which tears along the grain, acting like a miniature chisel. Some crosscut saws use special teeth called "rakers" designed to clean out the cut strips of wood from the kerf. Crosscut saws generally have larger teeth than rip saws. Some saws, such as Japanese saws and those used by the ancient Egyptians, are designed to cut only on the pull stroke. Western saws, on the other hand, are designed to cut on the push stroke.

  • https://en.wikipedia.org/wiki/Crosscut_saw - any saw blade for cutting wood perpendicular (against) the wood grain. Crosscut saws may be small or large, with small teeth close together for fine work like woodworking or large for coarse work like log bucking, and can be a hand tool or power tool.

The cutting edge of each tooth is angled in an alternating pattern. This design allows each tooth to act like a knife edge and slice through the wood. Some crosscut saws use special teeth called "rakers" designed to clean out the cut strips of wood from the kerf. Crosscut saws generally have larger teeth than rip saws. Some saws, such as Japanese saws and those used by the ancient Egyptians, are designed to cut only on the pull stroke. Western saws, on the other hand, are designed to cut on the push stroke.


  • https://en.wikipedia.org/wiki/Backsaw - any hand saw which has a stiffening rib on the edge opposite the cutting edge, allowing for better control and more precise cutting than with other types of saws. Backsaws are normally used in woodworking for precise work, such as cutting dovetails, mitres, or tenons in cabinetry and joinery. Because of the stiffening rib, the backsaws are limited in the depth to which they can cut. Backsaws usually have relatively closely spaced teeth, often with little or no set.



CNC

Pallet

Metalwork

Casting

  • https://en.wikipedia.org/wiki/Foundry - produces metal castings. Metals are cast into shapes by melting them into a liquid, pouring the metal in a mold, and removing the mold material or casting after the metal has solidified as it cools. The most common metals processed are aluminium and cast iron. However, other metals, such as bronze, brass, steel, magnesium, and zinc, are also used to produce castings in foundries.

Electronics

See Electronics


3D Printing

See also Graphics#3D

Articles

Things


Flying


Painting

Message board


ideas

Fire

Moth repellent