Difference between revisions of "How to make a fire brand"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
{{menu}} | {{menu}} | ||
| − | + | Worked together via Steve G., Blue H., etc. | |
| − | + | == Materials == | |
| + | * Wood - not too short or you're liable to get burnt, around 150cm, and somewhere between too thin when the wood gets burnt through and too thick, when it's inconvenient to hold - the thickness of 1.5 broom handles, something about 1.5 - 2 inches. Must be green wood - old/dead wood is no good, it will burn too quickly. | ||
| − | * | + | * Tinfoil - a fairly thick variety - its job is to protect the wood under the torch |
| − | * | + | * Chicken wire - 25mm hex or the smallest mesh you can get - this is to stop bits of fiery cloth going everywhere. 60 cms wide x 10 metres |
| − | * | + | * Staple gun + fence staples (or double ended horseshoe shaped nails and a hammer) |
| − | * | + | * Wire cutters |
| − | * | + | * Gardening or leather gloves |
* Cotton or linen (but definitely natural fibre) sheets. | * Cotton or linen (but definitely natural fibre) sheets. | ||
| − | + | * Bow saws (2) - need to cut a notch for the bow otherwise it might slip. | |
| − | + | == Steps == | |
| + | * Cover around the top 30cm of the wood with two layers (minimum) of aluminium foil | ||
| − | + | * Tear the cloth up into strips about an inch wide and as long as you can. | |
| − | + | * Start winding.... | |
| − | + | * Keep doing this. This is boring, really - hence all the dubious jokes. | |
| − | + | * Eventually.... stop | |
| − | |||
| − | + | * Cut out enough chickenwire mesh to wrap round the end and staple it in place. | |
| − | + | * Go to the pub for a bit. | |
| − | Light it! | + | * Dip the end of the torch in paraffin for a good long time (you can determine this by making more than one torch and having a test burn or two, good ends to start from are two hours and overnight) |
| + | |||
| + | * Light it! | ||
In an ideal world, it should burn for about half an hour or so, but once it's gone out you can sometimes restart it by swinging it wildly round your head so that any paraffin in the centre is flushed out to the edges. DO NOT do this near people, or with torch balls (they tend to go flying off unpredictably). | In an ideal world, it should burn for about half an hour or so, but once it's gone out you can sometimes restart it by swinging it wildly round your head so that any paraffin in the centre is flushed out to the edges. DO NOT do this near people, or with torch balls (they tend to go flying off unpredictably). | ||
| + | == Etc. == | ||
See also http://www.night-watch.net/content/Documents/FireBrands | See also http://www.night-watch.net/content/Documents/FireBrands | ||
And maybe http://www.night-watch.net/content/Documents/TorchBall | And maybe http://www.night-watch.net/content/Documents/TorchBall | ||
Revision as of 02:18, 25 April 2014
Worked together via Steve G., Blue H., etc.
Materials
- Wood - not too short or you're liable to get burnt, around 150cm, and somewhere between too thin when the wood gets burnt through and too thick, when it's inconvenient to hold - the thickness of 1.5 broom handles, something about 1.5 - 2 inches. Must be green wood - old/dead wood is no good, it will burn too quickly.
- Tinfoil - a fairly thick variety - its job is to protect the wood under the torch
- Chicken wire - 25mm hex or the smallest mesh you can get - this is to stop bits of fiery cloth going everywhere. 60 cms wide x 10 metres
- Staple gun + fence staples (or double ended horseshoe shaped nails and a hammer)
- Wire cutters
- Gardening or leather gloves
- Cotton or linen (but definitely natural fibre) sheets.
- Bow saws (2) - need to cut a notch for the bow otherwise it might slip.
Steps
- Cover around the top 30cm of the wood with two layers (minimum) of aluminium foil
- Tear the cloth up into strips about an inch wide and as long as you can.
- Start winding....
- Keep doing this. This is boring, really - hence all the dubious jokes.
- Eventually.... stop
- Cut out enough chickenwire mesh to wrap round the end and staple it in place.
- Go to the pub for a bit.
- Dip the end of the torch in paraffin for a good long time (you can determine this by making more than one torch and having a test burn or two, good ends to start from are two hours and overnight)
- Light it!
In an ideal world, it should burn for about half an hour or so, but once it's gone out you can sometimes restart it by swinging it wildly round your head so that any paraffin in the centre is flushed out to the edges. DO NOT do this near people, or with torch balls (they tend to go flying off unpredictably).
Etc.
See also http://www.night-watch.net/content/Documents/FireBrands
And maybe http://www.night-watch.net/content/Documents/TorchBall